Mixing Tube 1-11277-030-30R 500 with Ring Waterjet Parts

Short Description:

1-11277-030-30R
FLOW part number: 014214-30-30, 1000001-30-30, 1000002-30-30
Other references: 2414A0231, 2414A0235
Accustream part number: 1-11277-030-30, 1-12779-030-30
STM / RWS part number: HD810200, HD800300, HD811100
Rings and washer not included (10584)
Article number: 10967
Net Weight: 50 g

INQUIRY

Details

Mixing Tube 1-11277-030-30R 500 with Ring Waterjet Parts

Part Number	Description	Replaces
1-11277-020-20	Roctec 500, .281 x .020 x 2″	Flow # 010460-20-20
1-11277-030-30	Roctec 500, .281 x .030 x 3″	Flow # 014060-30-30 & 014194-30-30
1-11277-030-40	Roctec 500, .281 x .030 x 4″	Flow # 014060-30-40
1-11277-035-30	Roctec 500, .281 x .030 x 3″	Flow # 010460-35-30
1-11277-035-40	Roctec 500, .281 x .035 x 4″	Flow # 010460-35-40
1-11277-040-30	Roctec 500, .281 x .040 x 3″	Flow # 010460-40-30
1-11277-040-40	Roctec 500, .281 x .040 x 4″	Flow # 010460-40-40
1-11277-045-30	Roctec 500, .281 x .045 x 3″	Flow # 010460-45-30
1-11277-050-30	Roctec 500, .281 x .050 x 3	Flow # 010460-50-30
1-11277-050-40	Roctec 500, .281 x .050 x 4″	Flow # 010460-50-40

The part number 1-11277-030-30R refers to a ROCTEC 500 mixing tube with a performance locating ring, commonly used in Waterjet Cutting Systems. This component features an outer diameter of 0.281 inches, an inner diameter of 0.030 inches, and a length of 3.00 inches. The "R" at the end of the part number indicates the inclusion of a locating ring, which aids in precise alignment within the cutting head assembly.
This mixing tube is compatible with various waterjet systems, including those from Flow, AccuStream, and OMAX. It serves as a replacement for Flow part numbers 014194-30-30 and 1000003-30-30.