Sealing Head Flat Inlet Poppet 10107894 Abrasive Waterjet Parts Supplier

Short Description:

Parts:10107894
Sealing Head,Flat Inlet Poppet 

Other references: 103393, 11316, 1-11316, 30017, 5000065
Article number: 10091
Net Weight: 2 g

INQUIRY

Details

Sealing Head Flat Inlet Poppet 10107894 Abrasive Waterjet Parts Supplier

The Sealing Head Flat Inlet Poppet 10107894 is an OEM, washer‑style inlet check valve crafted from high‑grade stainless steel for KMT Streamline intensifier sealing heads using a 0.875″ plunger at pressures up to 55,000 psi (3,800 bar).

KMT Part Number：10107894
Function：Flat‑inlet, washer‑style poppet check valve for sealing head assemblies
Plunger Compatibility：0.875″ (22.2 mm) intensifier plungers
Pressure Rating：HP service up to 55,000 psi (3,800 bar)
Material：Precision‑machined stainless steel, Neoline‑grade finish
Weight：≈0.008 lbs (3.6 g)

Installation & Maintenance

1. Depressurize & Drain: Fully relieve system pressure and drain water from the intensifier before service.
2. Disassemble Sealing Head: Remove the sealing head assembly following KMT service manual or WSI instructions.
3. Extract Old Poppet: Use a suitable puller or gentle press method to avoid bore damage.
4. Inspect & Clean Bore: Remove debris; lightly polish any surface imperfections for optimal sealing.
5. Install New Poppet: Press 10107894 into the inlet bore until fully seated and flush with the head face.
6. Reassemble & Test: Reinstall sealing head components, repressurize slowly, and verify leak‑free operation at full system pressure.

If you need other KMT Waterjet Parts,Please contact us!