Sealing Head Outlet Seat 05116579 Waterjet Parts Supplier
1-11024-High-Pressure-Waterjet-Parts-In-Stock-For-Sale-p.html target='_blank'>Sealing-Head-Outlet-Seat-05112768-Abrasive-Water-Jet-Parts-Supplier-p.html target='_blank'>3HAC022379-001-Axis-2-3-For-Robot-Water-Jet-Cutting-Machine-Parts-In-Stock-p.html target='_blank'>Sealing Head Outlet Seat 05116579 Waterjet Parts Supplier
The Sealing Head Outlet Seat 05116579 is a high‑pressure discharge seat for use in the sealing head assemblies of their Streamline SL‑IV, SL‑V, and SL‑VI Intensifier-Assembly-80072333-Good-Quality-Water-Jet-Parts-In-Stock-p.html target='_blank'>Intensifier pumps—particularly the 75 hp–200 hp models featuring a 1.125″. Rated for continuous service up to 60,000 psi (4,100 bar), it offers a 24 mm sealing diameter that ensures minimal leakage and wear under extreme cycling.
Specifications
Part Number: 05116579 (KMT Genuine Parts SKU: 05116579)
Cross‑Reference: Accustream 1‑14263
Plunger Compatibility: 1.125″ (28.6 mm) intensifier plungers
Pressure Rating: Up to 60,000 psi (4,100 bar)
Sealing Diameter: 24 mm
Weight: ~0.06 lbs (0.03 kg) (typical for stainless‑steel sealing seats)
Installation & Maintenance
1. Pressure Relief: Fully depressurize and drain the intensifier before disassembly.
2. Sealing Head Removal: Extract the complete sealing head assembly per KMT service manual guidelines.
3. Old Seat Extraction: Use a suitable pull‑out tool or light pressing method to remove the worn seat without damaging the bore.
4. Bore Inspection: Clean and inspect the seating bore; polish minor imperfections to ensure full seating.
5. New Seat Installation: Press 05116579 into place, confirm flush seating and correct orientation, then torque retaining components to KMT specifications.
6. Reassembly & Testing: Reinstall the sealing head assembly, repressurize gradually, and verify leak‑free operation at full.
