500-15-0060 Focusing Tube R100 Abrasive Waterjet Mixing Tube

Short Description:

500-15-0060, Focusing Tube 0.030, R100 Mixing Tube
Part Identification
Part Number:500-15-0060 
Description:Focusing Tube 0.030″ (3″) Straight cutting
Material Binder-less tungsten carbide
Dimensions:0.76 mm × 7.14 mm × 76.2 mm
Net Weight:≈50 g
Operating Pressure:Up to 6 000 bar (87 000 psi)

INQUIRY

Details

500-15-0060 Focusing Tube R100 Abrasive Waterjet Mixing Tube

The 500-15-0060 is a focusing/mixing tube in Waterjet cutting heads to entrain abrasive into the high-pressure water stream. Manufactured from binder-less tungsten carbide (R100), it measures 7.14 mm (0.281 in) OD × 0.76 mm (0.030 in) ID × 76.2 mm (3.00 in) OAL, weighs approximately 50 g, and is rated for pressures up to 6 000 bar, ensuring exceptional wear resistance and consistent jet coherence under the most demanding cutting conditions.

Part Identification
Part Number:500-15-0060
Description:Focusing Tube 0.030″ (3″) Straight cutting
Material Binder-less tungsten carbide
Dimensions:0.76 mm × 7.14 mm × 76.2 mm
Net Weight:≈50 g
Operating Pressure:Up to 6 000 bar (87 000 psi)