Abrasive Nozzle Suction Port Adaptor 20464024 Water Jet Parts In Stock

Short Description:

Parts:20464024
Abrasive Nozzle,Suction Port Adaptor

Alternative code (cross code): AB20464024, 301035-1
Weight: 0.05
Working pressure: 4137 bar
Material: Stainless steel, rubber
Technical documentation: Mixing chamber

Where is it located:
Mixing chamber element.
What is its function:
Serves to fix the abrasive tube and feed the abrasive into the mixing chamber.

INQUIRY

Details

Abrasive 20464024-Water-Jet-Parts-In-Stock-p.html target='_blank'>Nozzle Suction Port Adaptor 20464024 Water Jet Parts In Stock

The Suction Port Adaptor, KMT part 20464024 (H2O Jet part 301035‑1), is the stainless‑steel feed‐tube adapter used on IDE II and Pro series abrasive cutting heads to channel abrasive from the mixing tube into the nozzle under ultra‐high pressure. It forms a 1-11024-High-Pressure-Waterjet-Parts-In-Stock-For-Sale-p.html target='_blank'>Sealed union—together with a brass WS0950-Waterjet-Cutting-Machine-Parts-For-Sale-p.html target='_blank'>Collet-1-12276-Abrasive-Waterjet-Parts-With-Good-Quality-Supplier-p.html target='_blank'>Collet, retaining nut, and o‑ring—to the abrasive nozzle, ensuring precise alignment and leak‑free operation at up to 60 000 psi.

Kit Components
Suction Port Adaptor (20464024)
O‑Ring Seal for adaptor (AB20464024A)
Retaining Collet (.373″ ID brass, AB20454345)
20454342-Abrasive-Waterjet-Parts-For-Sale-p.html target='_blank'>Abrasive 1-13632-Abrasive-Waterjet-Parts-With-Good-Quality-Supplier-p.html target='_blank'>Nozzle Nut (AB20454342 or KMT 20454342)

Installation & Maintenance Tips
Cleanliness: Before installation, flush the cutting head’s 303565-High-Quality-Waterjet-Cutting-Machines-Parts-p.html target='_blank'>WS2529-Water-Jet-Parts-For-Sale-p.html target='_blank'>Mixing Chamber and abrasive lines to remove debris.
Seal Inspection: Always replace the o‑ring (AB20464024A) when installing a new adaptor to maintain pressure integrity.
Proper Torque: Tighten the retaining nut to manufacturer‑specified torque (typically hand‑tight plus 1/8 turn) to avoid over‑compression of the o‑ring.
Alignment: Ensure the abrasive feed tube seats fully into the adaptor’s bore and that the collet grips the tube firmly without cutting into it.
Periodic Check: Inspect the adaptor for wear or scoring; replace if grooves appear that could jeopardize the seal.