Sleeve Bearing Split A-18018-8 New Abrasive Waterjet Parts Supplier
Sleeve Bearing Split A-18018-8 New Abrasive Waterjet Parts Supplier
| Part Number | Details |
|
A-10654 |
1" Diameter U-Cup Seal |
|
A-11367 |
6 Micron Filter 13" Long |
|
A-12500 |
Crosshead U-Cup Seal |
|
A-13262 |
Thermistor Sensor |
|
A-14003-4 |
Spring .77" ID 1" OD |
|
A-14132-1 |
Proximity Switch for DWJ Assembly DC Normally Open |
|
A-14345-6 |
Bit Threading Tool |
|
A-15034-1 |
70 Durometer O-ring |
|
A-15056-1 |
Proximity Switch for DWJ Assembly DC Normally Closed |
|
A-18018-8 |
Sleeve Bearing Split |
|
A-19643-1 |
87K On/Off Valve Spring Disc |
|
A-19889-30 |
Linear Rail Block; STD; 30 |
|
A-20158-1 |
Solenoid Valve; 4 Port; 4 Position; 24 VDC |
|
A-20295-1 |
U-Cup Seal With Wiper; 22 mm ID; 30 mm OD; 5 mm |
|
A-20622-1 |
Cutting Head Clamp Assembly Nut |
|
A-21703-1 |
Laser Pointer |
|
A-21775-1 |
100k, Elbow 1/4 in |
|
A-21842-1 |
100K 24 Volt Pressure Transducer |
|
A-22161-1 |
87K 1/4" Coupling |
|
A-22378-1 |
Single Ended Straight Female 3-Pin Cordset |
|
A-23705-1 |
10 Micron Breather Vent 3/8" NPT |
|
A-23873-1 |
Water Separator Filter 29" Long |
|
A-23875-1 |
Closed Loop 0.35 Micron Filter |
|
A-31184-2 |
Solenoid Valve; Normally Closed; 2 Port; 2 Position; 24 VDC |
|
B-1163-2 |
Intensifier Low-pressure Seal Kit (25X) |
|
B-1313-1 |
70 Micron Inline Nozzle Assembly Filter Screen |
|
B-5077-2 |
Coning/Threading Kit with Case |
|
B-5491-1 |
60K Swivel Shaft |
|
B-5703-1 |
60K Bleed-down Valve High-pressure Seat |
| B-5724-1 |
60K Swivel Body; Dual Axis |
|
B-8075-005 |
Silicone Dipped High Resiliency O-ring |
|
B-8345-1 |
Electronic Shift Proximity Sensor Assembly |
The Sleeve Bearing Split A-18018-8 is a high-precision, heavy-duty bearing designed to provide smooth, stable, and reliable motion for Waterjet Intensifiers, Hydraulic Pumps, and industrial machinery. Its split-sleeve design allows for easy installation, inspection, and maintenance without full disassembly of the equipment—saving valuable time during service operations.
Manufactured from high-strength bronze or alloy steel with precision-machined surfaces, the A-18018-8 bearing delivers excellent load-carrying capacity, low friction, and superior wear resistance. It’s engineered to handle high-pressure reciprocating motion, ensuring consistent alignment and reduced shaft wear in critical components such as crossheads, pistons, and plungers.
The KUNDA A-18018-8 Sleeve Bearing Split is corrosion-resistant and designed for long operational life, even in environments exposed to water, oil, and high temperatures. It’s a key component in maintaining efficiency, reducing vibration, and extending the service life of waterjet and hydraulic systems.
Contact Us for Pricing and Technical Support
Contact KUNDA Waterjet for the price, stock availability, technical support, and worldwide shipping information.
