100K 24 Volt Pressure Transducer A-21842-1 For Glass Waterjet Parts Supplier

Part Number	Replaces Parts	Details
A-10654		1" Diameter U-Cup Seal
A-11367		6 Micron Filter 13" Long
A-12500		Crosshead U-Cup Seal
A-13262		Thermistor Sensor
A-14003-4		Spring .77" ID 1" OD
A-14132-1		Proximity Switch for DWJ Assembly DC Normally Open
A-14345-6		Bit Threading Tool
A-15034-1		70 Durometer O-ring
A-15056-1		Proximity Switch for DWJ Assembly DC Normally Closed
A-18018-8		Sleeve Bearing Split
A-19643-1		87K On/Off Valve Spring Disc
A-19889-30		Linear Rail Block; STD; 30
A-20158-1		Solenoid Valve; 4 Port; 4 Position; 24 VDC
A-20295-1		U-Cup Seal With Wiper; 22 mm ID; 30 mm OD; 5 mm
A-20622-1		Cutting Head Clamp Assembly Nut
A-21703-1		Laser Pointer
A-21775-1		100k, Elbow 1/4 in
A-21842-1		100K 24 Volt Pressure Transducer
A-22161-1		87K 1/4" Coupling
A-22378-1		Single Ended Straight Female 3-Pin Cordset
A-23705-1		10 Micron Breather Vent 3/8" NPT
A-23873-1		Water Separator Filter 29" Long
A-23875-1		Closed Loop 0.35 Micron Filter
A-31184-2		Solenoid Valve; Normally Closed; 2 Port; 2 Position; 24 VDC
B-1163-2		Intensifier Low-pressure Seal Kit (25X)
B-1313-1		70 Micron Inline Nozzle Assembly Filter Screen
B-5077-2		Coning/Threading Kit with Case
B-5491-1		60K Swivel Shaft
B-5703-1		60K Bleed-down Valve High-pressure Seat
B-5724-1		60K Swivel Body; Dual Axis
B-8075-005		Silicone Dipped High Resiliency O-ring
B-8345-1		Electronic Shift Proximity Sensor Assembly

The 100K 24 Volt Pressure Transducer A-21842-1 is a precision-engineered pressure sensing device designed for accurate measurement and monitoring in 100,000 PSI (6,900 bar) Waterjet Cutting Systems, Hydraulic Intensifiers, and industrial high-pressure circuits. Built for extreme durability and stability, it ensures precise real-time pressure feedback for safe and efficient system operation.
Constructed from high-strength stainless steel with advanced sensing technology, the A-21842-1 transducer delivers exceptional accuracy, fast response, and long-term reliability. Its 24 VDC power supply and analog output (typically 4–20 mA or 0–5 V) make it easy to integrate with waterjet control systems, PLCs, and safety monitors. The sensor’s rugged design resists vibration, temperature changes, and hydraulic shock, maintaining stable readings even under continuous 100K PSI conditions.
Ideal for Waterjet Intensifier Pumps, pressure control panels, and industrial testing equipment, the KUNDA A-21842-1 Pressure Transducer provides critical performance data to help prevent overpressure events, optimize cutting quality, and extend component life.