Intensifier Low-pressure Seal Kit B-1163-2 40K WaterJet Pump Parts Supplier

Part Number	Replaces Parts	Details
A-10654		1" Diameter U-Cup Seal
A-11367		6 Micron Filter 13" Long
A-12500		Crosshead U-Cup Seal
A-13262		Thermistor Sensor
A-14003-4		Spring .77" ID 1" OD
A-14132-1		Proximity Switch for DWJ Assembly DC Normally Open
A-14345-6		Bit Threading Tool
A-15034-1		70 Durometer O-ring
A-15056-1		Proximity Switch for DWJ Assembly DC Normally Closed
A-18018-8		Sleeve Bearing Split
A-19643-1		87K On/Off Valve Spring Disc
A-19889-30		Linear Rail Block; STD; 30
A-20158-1		Solenoid Valve; 4 Port; 4 Position; 24 VDC
A-20295-1		U-Cup Seal With Wiper; 22 mm ID; 30 mm OD; 5 mm
A-20622-1		Cutting Head Clamp Assembly Nut
A-21703-1		Laser Pointer
A-21775-1		100k, Elbow 1/4 in
A-21842-1		100K 24 Volt Pressure Transducer
A-22161-1		87K 1/4" Coupling
A-22378-1		Single Ended Straight Female 3-Pin Cordset
A-23705-1		10 Micron Breather Vent 3/8" NPT
A-23873-1		Water Separator Filter 29" Long
A-23875-1		Closed Loop 0.35 Micron Filter
A-31184-2		Solenoid Valve; Normally Closed; 2 Port; 2 Position; 24 VDC
B-1163-2		Intensifier Low-pressure Seal Kit (25X)
B-1313-1		70 Micron Inline Nozzle Assembly Filter Screen
B-5077-2		Coning/Threading Kit with Case
B-5491-1		60K Swivel Shaft
B-5703-1		60K Bleed-down Valve High-pressure Seat
B-5724-1		60K Swivel Body; Dual Axis
B-8075-005		Silicone Dipped High Resiliency O-ring
B-8345-1		Electronic Shift Proximity Sensor Assembly

The Intensifier Low-Pressure Seal Kit B-1163-2 is a complete sealing package designed to maintain smooth, leak-free performance in Waterjet Intensifier Pumps operating under low-pressure conditions. This kit includes high-quality seals, O-rings, backup rings, and wear components, precisely manufactured to meet OEM specifications for durability, accuracy, and reliability.
Engineered from premium-grade polyurethane (PU), NBR (nitrile rubber), and PTFE composite materials, the B-1163-2 seal kit provides excellent resistance to water, oil, and hydraulic fluids. Its components are designed to withstand high mechanical stress, minimize friction, and ensure proper sealing between the low-pressure cylinder, plunger, and hydraulic chamber of the intensifier assembly.
The KUNDA B-1163-2 Low-Pressure Seal Kit helps reduce downtime, prevent fluid leakage, and extend the service life of critical waterjet components. It is fully compatible with major waterjet brands and serves as a direct replacement for OEM seal kits, ensuring stable performance during long production cycles.