Water Separator Filter A-23873-1 New Waterjet Parts Supplier
Water Separator Filter A-23873-1 New Waterjet Parts Supplier
| Part Number | Replaces Parts | Details |
|
A-10654 |
|
1" Diameter U-Cup Seal |
|
A-11367 |
|
6 Micron Filter 13" Long |
|
A-12500 |
|
Crosshead U-Cup Seal |
|
A-13262 |
|
Thermistor Sensor |
|
A-14003-4 |
|
Spring .77" ID 1" OD |
|
A-14132-1 |
|
Proximity Switch for DWJ Assembly DC Normally Open |
|
A-14345-6 |
|
Bit Threading Tool |
|
A-15034-1 |
|
70 Durometer O-ring |
|
A-15056-1 |
|
Proximity Switch for DWJ Assembly DC Normally Closed |
|
A-18018-8 |
|
Sleeve Bearing Split |
|
A-19643-1 |
|
87K On/Off Valve Spring Disc |
|
A-19889-30 |
|
Linear Rail Block; STD; 30 |
|
A-20158-1 |
|
Solenoid Valve; 4 Port; 4 Position; 24 VDC |
|
A-20295-1 |
|
U-Cup Seal With Wiper; 22 mm ID; 30 mm OD; 5 mm |
|
A-20622-1 |
|
Cutting Head Clamp Assembly Nut |
|
A-21703-1 |
|
Laser Pointer |
|
A-21775-1 |
|
100k, Elbow 1/4 in |
|
A-21842-1 |
|
100K 24 Volt Pressure Transducer |
|
A-22161-1 |
|
87K 1/4" Coupling |
|
A-22378-1 |
|
Single Ended Straight Female 3-Pin Cordset |
|
A-23705-1 |
|
10 Micron Breather Vent 3/8" NPT |
|
A-23873-1 |
|
Water Separator Filter 29" Long |
|
A-23875-1 |
|
Closed Loop 0.35 Micron Filter |
|
A-31184-2 |
|
Solenoid Valve; Normally Closed; 2 Port; 2 Position; 24 VDC |
|
B-1163-2 |
|
Intensifier Low-pressure Seal Kit (25X) |
|
B-1313-1 |
|
70 Micron Inline Nozzle Assembly Filter Screen |
|
B-5077-2 |
|
Coning/Threading Kit with Case |
|
B-5491-1 |
|
60K Swivel Shaft |
|
B-5703-1 |
|
60K Bleed-down Valve High-pressure Seat |
| B-5724-1 |
60K Swivel Body; Dual Axis |
|
|
B-8075-005 |
|
Silicone Dipped High Resiliency O-ring |
|
B-8345-1 |
|
Electronic Shift Proximity Sensor Assembly |
The Water Separator Filter A-23873-1 is a high-performance filtration component designed to remove moisture, oil mist, and solid contaminants from compressed air and fluid systems in WaterJet Cutting Machines, hydraulic equipment, and industrial pneumatic lines. Engineered for reliability and efficiency, it ensures clean, dry air and fluid flow — protecting sensitive components from corrosion, wear, and performance loss.
Constructed with a durable aluminum alloy housing and a multi-layer filter element, the A-23873-1 water separator combines centrifugal separation and fine filtration to achieve maximum efficiency. The built-in automatic drain valve allows for easy maintenance and continuous operation, preventing water accumulation inside the system.
Ideal for use in waterJet Pump control systems, air compressor lines, and hydraulic reservoirs, the KUNDA A-23873-1 Water Separator Filter enhances system reliability, reduces maintenance downtime, and extends the lifespan of precision components such as valves, seals, and regulators.
