0-5000 psi Oil Pressure Gauge A-1623 Back Mount Waterjet Parts Supplier

Short Description:

Oil Pressure Gauge
Minimum Order Quantity: 1
Availability: Yes

INQUIRY

Details

0-5000 psi Oil Pressure Gauge A-1623 Back Mount Waterjet Parts Supplier

Part Number	Details
A-00257-10	5 Amp Pressure Switch 1/8 NPT
A-0264-112	60k Small Intensifier Snap Ring
A-0275-006	70 Durometer Black Nitrile rubber O-ring
A-0290-010	High Resiliency O-ring
A-00562-1	Water Filter Cartridge 20" Long
A-00592-12	Tube NPT Male Connector
A-00633-023	90 Durometer Nitrile O-ring
A-0689-1	60K Anti Vibration Gland Collar
A-00750-6	50 Micron Filter - 20" Long
A-0782-12	60K High-pressure Tubing 3/8" OD; STD
A-0789-3	Valve; 3-Way; 60 KSI; 3/8"; VEE
A-01023-04	Timing Belt; 5 mm; 25 mm
A-1456	80 KSI High-pressure Gauge; 80; 6"
A-1623	0-5000 psi Oil Pressure Gauge (Back Mount)
A-1902	600 Grit Sand Paper
A-1903	320 Grit Sand Paper
A-2122	In-Tank Filter 8" Long 2" NPT
A-2171	160 PSI Gauge; Back Mount
A-2237	Shaft Coupling Insert 2"
A-2409	Compression Spring 0.396" ID 0.48" OD
A-3478	Heat Exchanger; Shell/Tube; 500 psi
A-3582	100 Mesh In Tank Screen Filter 3.3" Long
A-4261	Shaft Coupling With Flange and Keyway
A-5404	Heat Exchanger; Single Pass
A-5713	60K Insert
A-6059	Filter Head 5" Long
A-6060	Filter Housing 10" Long
A-6069	Clear Tubing 1/4" ID 3/8" OD 50 PSI
A-7230	3-Way 1/2" NPT 75-150 PSI Valve
A-9566	Surface Prep; Seal Shaft

Product Introduction

0–5000 PSI Oil Pressure Gauge A-1623 is a precision pressure measuring instrument designed for Waterjet Intensifier pump systems and other ultra-high-pressure hydraulic equipment. It is used to accurately monitor hydraulic oil pressure within the range of 0 to 5000 PSI, allowing operators to observe real-time system performance, verify operating conditions, and identify abnormal pressure fluctuations before they lead to equipment failure.

Manufactured with a high-quality stainless steel case, precision Bourdon tube mechanism, and a clear, easy-to-read dial, the Oil Pressure Gauge A-1623 delivers accurate pressure readings, excellent vibration resistance, and long-term reliability in demanding industrial environments.

Is It a Wear Part?

The oil pressure gauge itself is not typically considered a consumable wear part. However, continuous exposure to pressure pulsation, vibration, hydraulic oil contamination, and mechanical impact may gradually reduce measurement accuracy or damage the internal sensing mechanism. Periodic calibration and inspection are recommended.