70 Durometer O-ring A-15034-1 New Abrasive Waterjet Parts Supplier
70 Durometer O-ring A-15034-1 New Abrasive Waterjet Parts Supplier
| Part Number | Replaces Parts | Details |
|
A-10654 |
|
1" Diameter U-Cup Seal |
|
A-11367 |
|
6 Micron Filter 13" Long |
|
A-12500 |
|
Crosshead U-Cup Seal |
|
A-13262 |
|
Thermistor Sensor |
|
A-14003-4 |
|
Spring .77" ID 1" OD |
|
A-14132-1 |
|
Proximity Switch for DWJ Assembly DC Normally Open |
|
A-14345-6 |
|
Bit Threading Tool |
|
A-15034-1 |
|
70 Durometer O-ring |
|
A-15056-1 |
|
Proximity Switch for DWJ Assembly DC Normally Closed |
|
A-18018-8 |
|
Sleeve Bearing Split |
|
A-19643-1 |
|
87K On/Off Valve Spring Disc |
|
A-19889-30 |
|
Linear Rail Block; STD; 30 |
|
A-20158-1 |
|
Solenoid Valve; 4 Port; 4 Position; 24 VDC |
|
A-20295-1 |
|
U-Cup Seal With Wiper; 22 mm ID; 30 mm OD; 5 mm |
|
A-20622-1 |
|
Cutting Head Clamp Assembly Nut |
|
A-21703-1 |
|
Laser Pointer |
|
A-21775-1 |
|
100k, Elbow 1/4 in |
|
A-21842-1 |
|
100K 24 Volt Pressure Transducer |
|
A-22161-1 |
|
87K 1/4" Coupling |
|
A-22378-1 |
|
Single Ended Straight Female 3-Pin Cordset |
|
A-23705-1 |
|
10 Micron Breather Vent 3/8" NPT |
|
A-23873-1 |
|
Water Separator Filter 29" Long |
|
A-23875-1 |
|
Closed Loop 0.35 Micron Filter |
|
A-31184-2 |
|
Solenoid Valve; Normally Closed; 2 Port; 2 Position; 24 VDC |
|
B-1163-2 |
|
Intensifier Low-pressure Seal Kit (25X) |
|
B-1313-1 |
|
70 Micron Inline Nozzle Assembly Filter Screen |
|
B-5077-2 |
|
Coning/Threading Kit with Case |
|
B-5491-1 |
|
60K Swivel Shaft |
|
B-5703-1 |
|
60K Bleed-down Valve High-pressure Seat |
| B-5724-1 |
60K Swivel Body; Dual Axis |
|
|
B-8075-005 |
|
Silicone Dipped High Resiliency O-ring |
|
B-8345-1 |
|
Electronic Shift Proximity Sensor Assembly |
The 70 Durometer O-Ring A-15034-1 is a high-quality sealing component engineered to ensure leak-free performance in WaterJet Cutting Machines, Hydraulic Pumps, and industrial fluid systems. Designed to handle high pressure, temperature variation, and continuous operation, it provides consistent, long-lasting sealing under demanding conditions.
Manufactured from premium NBR (Nitrile Rubber) or FKM (Viton®) material with a 70 Shore A durometer hardness, the A-15034-1 O-ring offers the perfect balance between flexibility and resilience. It effectively resists oil, water, and hydraulic fluids, maintaining its shape and sealing strength even in extreme environments. The precise dimensional tolerance ensures a tight, uniform fit in both static and dynamic applications.
The KUNDA A-15034-1 70 Durometer O-Ring is commonly used in waterjet intensifiers, hydraulic cylinders, valves, and high-pressure fittings, where reliable sealing is critical to system safety and performance. Tested for durability and chemical resistance, it’s built to meet OEM standards for global industrial applications.
