Crosshead U-Cup Seal A-12500 New Flow Waterjet Parts Supplier
Crosshead U-Cup Seal A-12500 New Flow Waterjet Parts Supplier
| Part Number | Replaces Parts | Details |
|
A-10654 |
|
1" Diameter U-Cup Seal |
|
A-11367 |
|
6 Micron Filter 13" Long |
|
A-12500 |
|
Crosshead U-Cup Seal |
|
A-13262 |
|
Thermistor Sensor |
|
A-14003-4 |
|
Spring .77" ID 1" OD |
|
A-14132-1 |
|
Proximity Switch for DWJ Assembly DC Normally Open |
|
A-14345-6 |
|
Bit Threading Tool |
|
A-15034-1 |
|
70 Durometer O-ring |
|
A-15056-1 |
|
Proximity Switch for DWJ Assembly DC Normally Closed |
|
A-18018-8 |
|
Sleeve Bearing Split |
|
A-19643-1 |
|
87K On/Off Valve Spring Disc |
|
A-19889-30 |
|
Linear Rail Block; STD; 30 |
|
A-20158-1 |
|
Solenoid Valve; 4 Port; 4 Position; 24 VDC |
|
A-20295-1 |
|
U-Cup Seal With Wiper; 22 mm ID; 30 mm OD; 5 mm |
|
A-20622-1 |
|
Cutting Head Clamp Assembly Nut |
|
A-21703-1 |
|
Laser Pointer |
|
A-21775-1 |
|
100k, Elbow 1/4 in |
|
A-21842-1 |
|
100K 24 Volt Pressure Transducer |
|
A-22161-1 |
|
87K 1/4" Coupling |
|
A-22378-1 |
|
Single Ended Straight Female 3-Pin Cordset |
|
A-23705-1 |
|
10 Micron Breather Vent 3/8" NPT |
|
A-23873-1 |
|
Water Separator Filter 29" Long |
|
A-23875-1 |
|
Closed Loop 0.35 Micron Filter |
|
A-31184-2 |
|
Solenoid Valve; Normally Closed; 2 Port; 2 Position; 24 VDC |
|
B-1163-2 |
|
Intensifier Low-pressure Seal Kit (25X) |
|
B-1313-1 |
|
70 Micron Inline Nozzle Assembly Filter Screen |
|
B-5077-2 |
|
Coning/Threading Kit with Case |
|
B-5491-1 |
|
60K Swivel Shaft |
|
B-5703-1 |
|
60K Bleed-down Valve High-pressure Seat |
| B-5724-1 |
60K Swivel Body; Dual Axis |
|
|
B-8075-005 |
|
Silicone Dipped High Resiliency O-ring |
|
B-8345-1 |
|
Electronic Shift Proximity Sensor Assembly |
The Crosshead U-Cup Seal A-12500 is a premium-grade sealing component designed for waterjet intensifiers, hydraulic cylinders, and high-pressure pump assemblies. Engineered to maintain a reliable seal under extreme working conditions, it ensures leak-free performance, smooth motion, and maximum efficiency in demanding industrial applications.
Manufactured from reinforced polyurethane (PU) or PTFE with elastomer backing, the A-12500 U-Cup Seal delivers excellent elasticity, wear resistance, and temperature stability. Its U-shaped cross-section allows it to generate consistent radial sealing pressure, maintaining tight contact even under dynamic shaft movement and fluctuating pressures up to 60,000 PSI (4,137 bar).
Specifically designed for crosshead assemblies in waterjet intensifiers, the KUNDA A-12500 seal provides outstanding resistance to extrusion and deformation, ensuring long-lasting sealing performance in both static and reciprocating applications. It plays a vital role in preventing fluid leakage and maintaining the internal pressure balance of high-performance systems.
