Silicone Dipped High Resiliency O-ring B-8075-005 Waterjet Parts Supplier

Part Number	Replaces Parts	Details
A-10654		1" Diameter U-Cup Seal
A-11367		6 Micron Filter 13" Long
A-12500		Crosshead U-Cup Seal
A-13262		Thermistor Sensor
A-14003-4		Spring .77" ID 1" OD
A-14132-1		Proximity Switch for DWJ Assembly DC Normally Open
A-14345-6		Bit Threading Tool
A-15034-1		70 Durometer O-ring
A-15056-1		Proximity Switch for DWJ Assembly DC Normally Closed
A-18018-8		Sleeve Bearing Split
A-19643-1		87K On/Off Valve Spring Disc
A-19889-30		Linear Rail Block; STD; 30
A-20158-1		Solenoid Valve; 4 Port; 4 Position; 24 VDC
A-20295-1		U-Cup Seal With Wiper; 22 mm ID; 30 mm OD; 5 mm
A-20622-1		Cutting Head Clamp Assembly Nut
A-21703-1		Laser Pointer
A-21775-1		100k, Elbow 1/4 in
A-21842-1		100K 24 Volt Pressure Transducer
A-22161-1		87K 1/4" Coupling
A-22378-1		Single Ended Straight Female 3-Pin Cordset
A-23705-1		10 Micron Breather Vent 3/8" NPT
A-23873-1		Water Separator Filter 29" Long
A-23875-1		Closed Loop 0.35 Micron Filter
A-31184-2		Solenoid Valve; Normally Closed; 2 Port; 2 Position; 24 VDC
B-1163-2		Intensifier Low-pressure Seal Kit (25X)
B-1313-1		70 Micron Inline Nozzle Assembly Filter Screen
B-5077-2		Coning/Threading Kit with Case
B-5491-1		60K Swivel Shaft
B-5703-1		60K Bleed-down Valve High-pressure Seat
B-5724-1		60K Swivel Body; Dual Axis
B-8075-005		Silicone Dipped High Resiliency O-ring
B-8345-1		Electronic Shift Proximity Sensor Assembly

The Silicone Dipped High Resiliency O-Ring B-8075-005 is a top-quality sealing component engineered for superior elasticity, chemical resistance, and temperature stability in Waterjet Cutting Systems, Hydraulic Pumps, and industrial fluid control equipment. Designed for long-lasting performance, it provides reliable sealing under dynamic pressure and fluctuating temperatures.
This O-ring is made from high-resiliency elastomer with a silicone-dipped coating, offering enhanced flexibility, reduced friction, and improved resistance to oil, water, and cleaning agents. The silicone surface minimizes abrasion and sticking during installation, while the inner elastomer core ensures consistent compression and recovery even after prolonged use in high-pressure environments.
The KUNDA B-8075-005 O-Ring is ideal for sealing waterjet intensifier assemblies, hydraulic valves, pistons, and manifolds, providing a secure, leak-free fit and extended service life. Each O-ring is manufactured with strict dimensional tolerances to meet OEM specifications and global industrial standards.