80 Ksi High-pressure Gauge A-1456 Flow Waterjet Parts Supplier

Part Number	Replaces Parts	Details
A-00257-10		5 Amp Pressure Switch 1/8 NPT
A-0264-112		60k Small Intensifier Snap Ring
A-0275-006		70 Durometer Black Nitrile rubber O-ring
A-0290-010		High Resiliency O-ring
A-00562-1		Water Filter Cartridge 20" Long
A-00592-12		Tube NPT Male Connector
A-00633-023		90 Durometer Nitrile O-ring
A-0689-1		60K Anti Vibration Gland Collar
A-00750-6		50 Micron Filter - 20" Long
A-0782-12		60K High-pressure Tubing 3/8" OD; STD
A-0789-3		Valve; 3-Way; 60 KSI; 3/8"; VEE
A-01023-04		Timing Belt; 5 mm; 25 mm
A-1456		80 KSI High-pressure Gauge; 80; 6"
A-1623		0-5000 psi Oil Pressure Gauge (Back Mount)
A-1902		600 Grit Sand Paper
A-1903		320 Grit Sand Paper
A-2122		In-Tank Filter 8" Long 2" NPT
A-2171		160 PSI Gauge; Back Mount
A-2237		Shaft Coupling Insert 2"
A-2409		Compression Spring 0.396" ID 0.48" OD
A-3478		Heat Exchanger; Shell/Tube; 500 psi
A-3582		100 Mesh In Tank Screen Filter 3.3" Long
A-4261		Shaft Coupling With Flange and Keyway
A-5404		Heat Exchanger; Single Pass
A-5713		60K Insert
A-6059		Filter Head 5" Long
A-6060		Filter Housing 10" Long
A-6069		Clear Tubing 1/4" ID 3/8" OD 50 PSI
A-7230		3-Way 1/2" NPT 75-150 PSI Valve
A-9566		Surface Prep; Seal Shaft

The 80 KSI High-Pressure Gauge A-1456 is a precision-engineered instrument designed to measure and monitor operating pressures up to 80,000 PSI in WaterJet Cutting Machines and intensifier pump systems. This gauge provides accurate, real-time pressure readings, allowing operators to maintain optimal performance, ensure safety, and prevent overpressure conditions in high-pressure waterjet applications.
Built with a rugged stainless steel body and a vibration-resistant internal mechanism, the A-1456 waterjet high-pressure gauge delivers reliable performance even in harsh environments. Its clear, easy-to-read dial and precise calibration guarantee accurate monitoring of waterJet Pump output pressure, helping to protect seals, valves, and tubing from damage caused by pressure fluctuations.
KUNDA supplies the 80 KSI High-Pressure Gauge A-1456 under strict quality and calibration standards, ensuring compatibility with leading waterjet intensifiers, manifolds, and control systems. By choosing this gauge, operators benefit from improved system safety, reduced maintenance costs, and enhanced cutting stability.