Bit Threading Tool A-14345-6 New Good Price Waterjet Parts Supplier
Bit Threading Tool A-14345-6 New Good Price Waterjet Parts Supplier
| Part Number | Replaces Parts | Details |
|
A-10654 |
|
1" Diameter U-Cup Seal |
|
A-11367 |
|
6 Micron Filter 13" Long |
|
A-12500 |
|
Crosshead U-Cup Seal |
|
A-13262 |
|
Thermistor Sensor |
|
A-14003-4 |
|
Spring .77" ID 1" OD |
|
A-14132-1 |
|
Proximity Switch for DWJ Assembly DC Normally Open |
|
A-14345-6 |
|
Bit Threading Tool |
|
A-15034-1 |
|
70 Durometer O-ring |
|
A-15056-1 |
|
Proximity Switch for DWJ Assembly DC Normally Closed |
|
A-18018-8 |
|
Sleeve Bearing Split |
|
A-19643-1 |
|
87K On/Off Valve Spring Disc |
|
A-19889-30 |
|
Linear Rail Block; STD; 30 |
|
A-20158-1 |
|
Solenoid Valve; 4 Port; 4 Position; 24 VDC |
|
A-20295-1 |
|
U-Cup Seal With Wiper; 22 mm ID; 30 mm OD; 5 mm |
|
A-20622-1 |
|
Cutting Head Clamp Assembly Nut |
|
A-21703-1 |
|
Laser Pointer |
|
A-21775-1 |
|
100k, Elbow 1/4 in |
|
A-21842-1 |
|
100K 24 Volt Pressure Transducer |
|
A-22161-1 |
|
87K 1/4" Coupling |
|
A-22378-1 |
|
Single Ended Straight Female 3-Pin Cordset |
|
A-23705-1 |
|
10 Micron Breather Vent 3/8" NPT |
|
A-23873-1 |
|
Water Separator Filter 29" Long |
|
A-23875-1 |
|
Closed Loop 0.35 Micron Filter |
|
A-31184-2 |
|
Solenoid Valve; Normally Closed; 2 Port; 2 Position; 24 VDC |
|
B-1163-2 |
|
Intensifier Low-pressure Seal Kit (25X) |
|
B-1313-1 |
|
70 Micron Inline Nozzle Assembly Filter Screen |
|
B-5077-2 |
|
Coning/Threading Kit with Case |
|
B-5491-1 |
|
60K Swivel Shaft |
|
B-5703-1 |
|
60K Bleed-down Valve High-pressure Seat |
| B-5724-1 |
60K Swivel Body; Dual Axis |
|
|
B-8075-005 |
|
Silicone Dipped High Resiliency O-ring |
|
B-8345-1 |
|
Electronic Shift Proximity Sensor Assembly |
The Bit Threading Tool A-14345-6 is a high-precision maintenance tool designed for threading, tightening, and aligning cutting head components in waterjet systems and high-pressure plumbing assemblies. Engineered for durability and accuracy, it ensures smooth and reliable threading operations, reducing wear on fittings and improving system integrity.
Crafted from hardened stainless steel and finished with precision machining, the A-14345-6 threading tool provides excellent grip, dimensional accuracy, and resistance to deformation under torque. It’s specially designed for Waterjet Orifice assemblies, mixing tubes, and high-pressure fittings, allowing technicians to perform quick, precise installation and removal without damaging threads or seals.
The KUNDA Bit Threading Tool A-14345-6 is an essential accessory for professional maintenance of 60K PSI WaterJet Cutting Machines. Whether used in production facilities or service workshops, it helps extend component life, maintain proper sealing, and ensure consistent cutting performance.
