Cutting Head Clamp Assembly Nut A-20622-1 New Waterjet Parts Supplier
Cutting Head Clamp Assembly Nut A-20622-1 New Waterjet Parts Supplier
| Part Number | Replaces Parts | Details |
|
A-10654 |
|
1" Diameter U-Cup Seal |
|
A-11367 |
|
6 Micron Filter 13" Long |
|
A-12500 |
|
Crosshead U-Cup Seal |
|
A-13262 |
|
Thermistor Sensor |
|
A-14003-4 |
|
Spring .77" ID 1" OD |
|
A-14132-1 |
|
Proximity Switch for DWJ Assembly DC Normally Open |
|
A-14345-6 |
|
Bit Threading Tool |
|
A-15034-1 |
|
70 Durometer O-ring |
|
A-15056-1 |
|
Proximity Switch for DWJ Assembly DC Normally Closed |
|
A-18018-8 |
|
Sleeve Bearing Split |
|
A-19643-1 |
|
87K On/Off Valve Spring Disc |
|
A-19889-30 |
|
Linear Rail Block; STD; 30 |
|
A-20158-1 |
|
Solenoid Valve; 4 Port; 4 Position; 24 VDC |
|
A-20295-1 |
|
U-Cup Seal With Wiper; 22 mm ID; 30 mm OD; 5 mm |
|
A-20622-1 |
|
Cutting Head Clamp Assembly Nut |
|
A-21703-1 |
|
Laser Pointer |
|
A-21775-1 |
|
100k, Elbow 1/4 in |
|
A-21842-1 |
|
100K 24 Volt Pressure Transducer |
|
A-22161-1 |
|
87K 1/4" Coupling |
|
A-22378-1 |
|
Single Ended Straight Female 3-Pin Cordset |
|
A-23705-1 |
|
10 Micron Breather Vent 3/8" NPT |
|
A-23873-1 |
|
Water Separator Filter 29" Long |
|
A-23875-1 |
|
Closed Loop 0.35 Micron Filter |
|
A-31184-2 |
|
Solenoid Valve; Normally Closed; 2 Port; 2 Position; 24 VDC |
|
B-1163-2 |
|
Intensifier Low-pressure Seal Kit (25X) |
|
B-1313-1 |
|
70 Micron Inline Nozzle Assembly Filter Screen |
|
B-5077-2 |
|
Coning/Threading Kit with Case |
|
B-5491-1 |
|
60K Swivel Shaft |
|
B-5703-1 |
|
60K Bleed-down Valve High-pressure Seat |
| B-5724-1 |
60K Swivel Body; Dual Axis |
|
|
B-8075-005 |
|
Silicone Dipped High Resiliency O-ring |
|
B-8345-1 |
|
Electronic Shift Proximity Sensor Assembly |
The Cutting Head Clamp Assembly Nut A-20622-1 is a high-precision fastening component designed to secure and stabilize the cutting head assembly in WaterJet Cutting Machines. Built to handle extreme pressure and vibration, it ensures accurate alignment, firm clamping, and reliable sealing performance during continuous high-pressure cutting operations.
Manufactured from heat-treated stainless steel or high-strength alloy steel, the A-20622-1 nut provides exceptional mechanical strength, corrosion resistance, and thread stability. Its precision-machined profile allows smooth installation and removal while maintaining consistent torque and alignment with the cutting head body. This ensures the mixing tube, orifice, and cutting nozzle remain perfectly positioned for optimal jet performance.
The KUNDA A-20622-1 Cutting Head Clamp Assembly Nut is compatible with major OEM waterjet systems and is engineered to meet strict tolerance and pressure standards. It’s an essential replacement part for ensuring cutting accuracy, system reliability, and safe long-term operation.
